Table of Contents
Advertisement
Quick Links
UM10388
UBA2024AP DIP8 18 W demo board
Rev. 3 — 27 January 2011
Document information
Info
Keywords
Abstract
Content
UBA2024AP, half-bridge CFL driver, non-dimmable
This document describes the correct use of the UBA2024AP half-bridge
CFL driver demo boards for both 120 V and 230 V mains voltages and
some circuit examples for up to 18 W
User manual
Advertisement
Table of Contents
Related Manuals for NXP Semiconductors UM10388
Summary of Contents for NXP Semiconductors UM10388
- Page 1 UM10388 UBA2024AP DIP8 18 W demo board Rev. 3 — 27 January 2011 User manual Document information Info Content Keywords UBA2024AP, half-bridge CFL driver, non-dimmable Abstract This document describes the correct use of the UBA2024AP half-bridge CFL driver demo boards for both 120 V and 230 V mains voltages and...
- Page 2 UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board Revision history Date Description 20110127 third issue 20100407 second issue 20091001 first issue UM10388 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
-
Page 3: Introduction
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 1. Introduction WARNING Lethal voltage and fire ignition hazard The non-insulated high voltages that are present when operating this product, constitute a risk of electric shock, personal injury, death and/or ignition of fire. - Page 4 UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board The IC is not equipped with a thermal protection or open lamp detection because the IC is intended as a cost-effective solution to drive CFLs with an integrated ballast (CFLi). The...
-
Page 5: Schematic Diagram
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x L FILT 1N4007 1N4007 1.5 mH R osc L LA C FS 200 kΩ... -
Page 6: Specification
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 3. Specification 019aab383 019aab384 Fig 3. UBA2024AP 230 V (AC) mains demo board Fig 4. UBA2024AP 120 V (AC) mains demo board The UBA2024AP demo board is set-up to drive an 18 W burner with a G24q-2 type of socket. -
Page 7: Board Connections
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board Burners: • Osram Dulux D/E 18 W; 4-pin; G24q-2 • Philips PL-C 18 W; 4-pin; G24q-2 • General Electric F18DBX ECO 4P; G24q-2 Other burners that are electrically suitable and safe to use are the following: •... -
Page 8: Lamp Inductor Selection
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board L1R1 110-120 V (AC) W1 1 110 V AC 019aab386 Fig 6. Connecting the 120 V (AC) mains demo board 3.2 Lamp inductor selection The inductor supplied with this board has been made to accommodate three inductors in one. -
Page 9: Bill Of Material 18 W Lamp
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 3.3 Bill of material 18 W lamp Table 1. 18 W lamp (16.5 W; 145 mA burner; requiring warm ignition; f = 45 kHz) Reference Description Remarks 115 V; 60 Hz 230 V;... -
Page 10: Conduction Emissions Test
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board Table 2. Components values for the optional lamp detection circuit Reference Description Remarks Value > 100 at 10 A Q1-1, Q2-2 PNP/NPN transistor in one BC847BNP package or use separate transistors. -
Page 11: Examples Of Different Lamp Powers
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 019aab389 Fig 9. Conducted EMI 230 V; 50 Hz, in neutral, quasi peak (QP blue trace) and average (AV black trace) 5. Examples of different lamp powers 5.1 8 W lamp Table 3. -
Page 12: Lamp
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board Table 3. 8 W lamp (7 W; 150 mA burner; suited for cold ignition; f = 46 kHz) Reference Description Remarks 115 V; 60 Hz 230 V; 50 Hz floating supply buffer SMD: X7R type;... -
Page 13: Lamp
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 5.3 13 W lamp Table 5. 13 W lamp (12 W; 150 mA burner; suited for warm ignition; f = 44 kHz) Reference Description Remarks 115 V; 60 Hz 230 V; 50 Hz 6.8 ... -
Page 14: Inductor Specification
UM10388 NXP Semiconductors UBA2024AP DIP8 18 W demo board 6. Inductor specification SQ. 0.64 3, 3.81 dimensions in mm 5.08 Ø 1.57 recommended P.C. pattern, component side 019aab080 Fig 10. Inductor specification Remark: The following electrical specifications are at 25 C unless otherwise specified. -
Page 15: Legal Information
In no event shall NXP Semiconductors, its affiliates or their suppliers be liable Suitability for use — NXP Semiconductors products are not designed, to customer for any special, indirect, consequential, punitive or incidental... -
Page 16: Table Of Contents
‘Legal information’. © NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 27 January 2011 Document identifier: UM10388...
Need help?
Do you have a question about the UM10388 and is the answer not in the manual?
Questions and answers