Table of Contents
Advertisement
NXP Semiconductors
1
Introduction
Table 1. UJA1169A evaluation boards and device overview
Evaluation board
On-board device
UJA1169AF-EVB
UJA1169ATK/F
UJA1169AXF-EVB
UJA11692ATK/X/F
UJA1169AF3-EVB
UJA1169ATK/F/3
UM11758
User manual
This document is the user guide for the UJA1169A evaluation boards. It is intended
for engineers involved in the evaluation, design, implementation and validation of the
UJA1169A product family. This guide discusses power supply requirements and the MCU
and CAN bus interfaces, and describes how to connect the boards into an ECU/CAN
network.
The UJA1169A evaluation boards are designed to facilitate the testing and evaluation of
UJA1169A product features in a variety of microcontroller IO interface environments. All
MCU interface signals can be accessed in two ways: at a header row on the top side and
also at header rows on the bottom side that can be plugged directly into many NXP MCU
evaluation boards. The UJA1169A evaluation boards are designed to be compatible
with the S32K1xx evaluation board series from NXP and to support the use of standard
software development tools and drivers.
The UJA1169A evaluation board family consists of three variant boards as detailed
in
Table
1. The entire UJA1169A product family can be evaluated using these three
boards, and not just the onboard devices. For example, the UJA1169AF-EVB board
(with a UJA1169ATK/F device) can be used to evaluate the UJA1169ATK by setting
bit CPNC = 0 in the CAN control register. In the same way, the UJA1169ATK/X and
UJA1169ATK/3 devices can be evaluated using the the UJA1169AXF-EVB and
UJA1169AF3-EVB boards, respectively.
Modes
●
●
●
●
●
●
All information provided in this document is subject to legal disclaimers.
Supplies
●
●
●
●
●
●
●
●
●
Rev. 1 — 19 April 2022
UJA1169A evaluation boards
Host
interface Additional features
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
UM11758
Package
●
●
●
●
●
●
●
●
●
© NXP B.V. 2022. All rights reserved.
2 / 39
Advertisement
Table of Contents
