GB
6
Certification
The product complies with the Regulation (EU) 2016/425 (Personal Protective Equipment). The PPE is subject to the
conformity assessment procedure based on internal production control plus supervised product checks at random
intervals (Module C2) under surveillance of the notified body TÜV Austria Services GmbH, Deutschstraße 10, 1230
Vienna, Austria, identification number 0408. The notified body DGUV Test Prüf- und Zertifizierungsstelle Fachbereich
Persönliche Schutzausrüstungen, Zwengenberger Straße 68, 42781 Haan, Germany, identification number 0299, has
performed the EU type-examination (Module B) and issued the EU type-examination certificate.
Approvals
A belt system mounted to a MSA AirGo, AirMaXX or M1 breathing apparatus complies with the following standards:
alphaBELT Basic
EN 137:2006, Class 2:
Compressed Air Breathing Apparatus for Fire Service use Operating temperature of belt
system: -40 °C to +100 °C
EN 358:2018
Work positioning and restraint belts
ATEX
II 3G IIB
II 3D
alphaBELT Pro
Compressed Air Breathing Apparatus for Fire Service use Operating temperature of belt
EN 137:2006, Class 2:
system: -40 °C to +100 °C
EN 358:2018
Work positioning and restraint belts
EN 1498:2006, class B: Rescue loop class B only in combination with alphaBELT Lanyard
ATEX
II 3G IIB
II 3D
alphaBELT Lanyard
EN 137:2006, Class 2:
Compressed Air Breathing Apparatus for Fire Service use Operating temperature of belt
system: -40 °C to +100 °C
Work positioning and restraint belts and connecting lanyard for restraint belts
EN 358:2018
EN 1498:2006, class A,
Rescue loop class A and C
C
EN 795:2012 type B (1
Anchor Strap
Person)
ATEX
II 3G IIB
II 3D
WARNING!
If the breathing apparatus is used in combination with the belt system, this combination may no longer comply with the
approval, which is specified on the backplate of the breathing apparatus, but with the ATEX approval II 3G IIB, II 3D.
Failure to follow this warning can result in serious personal injury or death.
6 Certification
25
Need help?
Do you have a question about the alphaBELT Pro and is the answer not in the manual?
Questions and answers