At&T 615 And 65Xx Series; At&T; At&T 6518; At&T 6528 - Intermec MicroBar 9710 Reference Manual

This reference manual is a collection of all the individual wedge interface reference
(WIF) guides. It lists the part numbers for wedge interface kit, keyboard and terminal
cables, and gives the power supply requirements and bar codes for configuring the
wedge (reader) for a specific terminal. Use this reference manual with a Wedge
Reader User's Manual for complete instructions on using a reader.
AT&T 615 and 65XX Series
This section covers these workstations:
•
•
•
•
The individual Wedge Interface Guide corresponding to this section is part number
0542351.
Cables
Connecting the reader to one of these workstations requires two cables: a keyboard
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use these part numbers:
•
•
•
Power Supply
The reader does not require an external power supply to work with the workstations. Set
the PCB jumper to connect pins 1 and 2 on the reader's rear panel.
•
AT&T 615
•
AT&T 6518
•
AT&T 6528
•
AT&T 6529
Wedge interface kit (P/N 054230)
Keyboard cable (P/N 054229)
Terminal cable (P/N 054228)
C d 39
AT&T 615 and 65XX Series
AT&T 6538
AT&T 6539
AT&T 6578
AT&T 6579
1