Intermec MicroBar 9710 Reference Manual page 17

Configuring the Reader
Scan the appropriate label to configure the reader for your workstation. The reader
should emit one low beep followed by four low beeps, indicating that the reader has
successfully stored the configuration and is ready to read labels. If the reader emits a
different beep sequence, refer to the Wedge Reader User's Manual, Section 2, for
beeper identification.
To Set Workstation Configuration to
AT&T 6386SX, AT&T 6386 WGS
Compaq
US Keyboard
Compaq
Danish Keyboard
Compaq
French Keyboard
Compaq
French Canadian Keyboard
Compaq
German Keyboard
Compaq
Italian Keyboard
Compaq
Norwegian Keyboard
Compaq
Spanish Keyboard
Compaq
Swedish/Finnish Keyboard
C d 39
Compaq/PS-2 Series
Scan This Bar Code
*$+TA1*
*$+TA1*
*$+TA5*
*$+TA5*
*$+TA7*
*$+TA7*
*$+TA8*
*$+TA8*
*$+TA9*
*$+TA9*
*$+TA15*
*$+TA15*
*$+TA10*
*$+TA10*
*$+TA11*
*$+TA11*
*$+TA12*
*$+TA12*
*$+TA13*
*$+TA13*
9