Set the Phase (AC Power Only)
•
If W or VAR is shown, change the phase shift to change the main power
value. Change of phase does not change the output apparent power.
•
Repeatedly push until the phase value is shown in edit mode (blue
background).
•
° softkey. The value can also be set with the cursor buttons or Rotary Knob.
The value can be set with the numeric keypad and confirmed by pushing the
•
The main power value is recalculated with the new set phase and existing
current and voltage setting. The calculation is only made if active or reactive
power is shown.
•
Next, folders (outputs) are activated by repeatedly pushing the Channel
softkey.
Front-Panel Operation
Generating Electric Power
chap 4-17 3.bmp
chap 4-17 4.bmp
4
4-21