Connection To The M, L Power Pack; Connecting To The Converter - pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300
6. Align the arrows on the quick connector adapter (3)
and the quick connector (1).
7. Connect the quick connector adapter (3) to the quick
connector (1).
8. Ensure that the quick connector (1), quick connec-
tor adapter (3) and tool power cord (2) are properly
connected.

4.4.2. CONNECTION TO THE M, L POWER PACK

Warning
Never disconnect the tool power cord without first checking that the ON/OFF switch has been
set to "0" (off).
1. Make sure that the battery ON/OFF switch is set to
"0".
2. Align the alignment marker on the tool's power cord
(1) with the notch in the battery connector (2).
3. Connect the tool's power cord (1) to the battery con-
nector (2).
4. Tighten the tightening ring (3) of the power cord of
the tool.

4.4.3. CONNECTING TO THE CONVERTER

• Refer to the operating instructions supplied with the converter.
20
48_151649-F