Maintenance; Maintenance Table; Nettoyage; Replacing The Rake Prongs On The Solo Vibrating Head - pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300

6. MAINTENANCE

6.1. MAINTENANCE TABLE

Cleaning the machine
Visual inspection of the tool
Checking the prongs of the rake
Checking the tightening of the rake
Checking the tightening of the prongs
Checking the battery charge level
Have the tool inspected by an authorised dis-
tributor
Important
Your Olive harvesting shaker rake Olivion Power 48 P230 / T220-300 should have a maintenance servicing
at least every 200 hours or once a year.

6.2. NETTOYAGE

1. Clean your tool using compressed air and a damp
cloth, focusing on the parts that come into contact
with the plant growth.
Important
Never point the air jet directly at the tool, maintain
a safe distance.
Never use solvents (trichloroethylene, white
spirit, petrol, etc.) to clean the tool.

6.3. REPLACING THE RAKE PRONGS ON THE SOLO VIBRATING HEAD

Caution
Before making any adjustments to the tool, make sure it is turned off and disconnect the
power cord connected to the battery.
24
48_151649-F
At each start-up
X
X
After use Every year or after
200 hours of use
X
X
X
X
X
X