Servicing; Management Of The Recycling And Recovery Of Waste From Your Tool; Security Warning For The Power 48 Olive Harvesting Shaker Rake; Safety Measures Associated With Chargers And Battery Use - pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300
5. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk of injury.
6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130 °C (or 265°F) may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature
7.
range specified in the instructions. Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.

2.2.6. SERVICING

1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufac-
turer or authorized service providers.

2.2.7. MANAGEMENT OF THE RECYCLING AND RECOVERY OF WASTE FROM YOUR TOOL

1. When the tool reaches the end of its life, PELLENC keeps the end of life sheet of the equipment at
disposal. The end of life sheet provides instructions for safely removing components.

2.3. SECURITY WARNING FOR THE POWER 48 OLIVE HARVESTING SHAKER RAKE

1. Never modify the connector in any way whatsoever.
2. Do not expose tools to the rain or damp conditions.
3. As the material of the pole conducts electricity, always keep the tool well away from power and telephone lines,
and any other sources of electric power
4. THIS TOOL MAY CAUSE INJURIES. Read the instructions carefully about the proper handling, operation,
maintenance, start-up and stopping of the tool. Become familiar with its correct use.
5. No one other than the user(s) should stand within 5 metres of the tool in operation (danger of flying fragments).
6. Flying olives can cause injury. Wear protective clothing such as goggles, helmet, and gloves when using the
tool.
7. Never use the tool if it is damaged, incorrectly adjusted, or incompletely assembled.
8. When the machine is not in use, always put the battery in the "0" off position.
9. Remove any adjusting wrenches before switching the tool on.
10. Always use an appropriate lifting tool that complies with the applicable labour regulations for working at heights.
11. When in use, the electric motor of the tool may heat up (risk of burns). Avoid contact with skin, clothing, or any
flammable products (risk of explosion) during and after use.

2.4. SAFETY MEASURES ASSOCIATED WITH CHARGERS AND BATTERY USE

Note
Refer to the instruction manual supplied with your battery.
8
48_151649-F