Description Of The Operating Modes; Prong Foam Covers Kit (Option); Stopping The Tool - pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300

5.3. DESCRIPTION OF THE OPERATING MODES

For better user comfort and to reduce battery consumption, the tool has the economy mode activated by default. This
mode starts at an extremely slow speed. Then, on contact with plant growth, the speed changes to standard speed.
Mode change and/or speed change, see table below:
Required
action
Speed change The tool is running.
Deactivate The battery is pow-
economy mode ered on. The tool is
stopped.

5.4. PRONG FOAM COVERS KIT (OPTION)

In the case of a harvest for table consumption and in or-
der to preserve the appearance of your fruit, foam prong
covers are available that thread onto the rake prongs of
your Olivion Power 48 P230 / T220-300 (ref. 50538).
To fit the prong foam covers, refer to the mounting/as-
sembly instructions delivered with the kit.

5.5. STOPPING THE TOOL

1. Press the switch (1) on the handle of the tool
2. Disconnect the tool, refer to the manual supplied
with the battery or converter.
48_151649-F
State How?
Hold the button down
continuously for 6
seconds.
Hold the button down
continuously for 3
seconds.
Result
• If the tool was in standard speed mode, it
switches to slow speed mode.
• If the tool was slow speed mode, it switches to
standard speed mode.
• If the tool was in economy mode, that mode is
deactivated.
• If the tool was not in economy mode, that mode
is activated.
23