pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual page 27

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300
Removal
1. Loosen the collar screws (1) of each rake support
with a 4 mm Allen key.
2. Remove the 4 collar screws (1).
3. Remove the rake supports (2).
4. Using a TORX 20 screwdriver, remove the prong at-
tachment screw.
5. Using a screwdriver, remove the washer (3).
6. Remove the rake prong (4) from its slot.
7. Do this for all the prongs and dispose of them re-
sponsibly.
Tip
If the rake prong (4) is difficult to
remove, a second technique is
possible:
1. Unscrew the screw (5) only partially.
2. Tap the head of screw (5) with a hammer. This
will make it easier to dislodge the rake prong
(4).
48_151649-F
27