pellenc Olivion Power 48 P230 + SOLO Olivion head Operating Instructions Manual page 25

OLIVE HARVESTING SHAKER RAKE OLIVION POWER 48 P230 / T220-300
Removal
1. Using a 4mm Allen key, remove the screws under
the rake support.
2. Remove the rake support.
2. Using a TORX 20 screwdriver, remove the prong at-
tachment screw.
3. Remove the prong support washer (1) by raising it
with a screwdriver.
4. Remove the rake prong (2).
5. Do this for all the prongs and dispose of them re-
sponsibly.
Tip
If the rake prong (2) is difficult to
remove, a second technique is
possible:
1. Unscrew the screw (3) only partially.
2. Tap the head of the screw (3) with a hammer.
This will make it easier to dislodge the rake
prong (2).
48_151649-F
25