Table of Contents
Advertisement
Remove the 4 fixing screws of the pre-fitted battery tray.
Note
The Alpha 260/520 battery holder is sold with the
harness.
Remove the battery holder from the harness before
installing it on the mower.
Remove the battery tray that is to be replaced.
Place the alternative battery tray on the frame tube.
Install and tighten the 4 fixing screws of the battery tray.
4.4. 750 / 1200 / 1500 BATTERY: INSTALLATION AND CONNECTION
Check the battery life before use. If necessary, recharge
the battery using the charger supplied with the battery
(See the battery instruction manual).
Slide the battery from the rear into the upper hook of the
battery tray (9).
Clip the front of the battery into the lower hook of the
battery tray (9).
Check that the battery is completely locked on the tray.
To remove the battery from the battery tray (9), lift it while
pressing the release button.
14
LAWN MOWER RASION 2 SMART
59_143879-B
59N_18_036
59N_18_037
Advertisement
Table of Contents
