Error Messages; Erplabel V - Intermec EasyCoder 301 Installation And Operation Manual

Error Messages

ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1
Error 513 – Odd number of field delimiters
ERPLabel uses the string "/&" to identify the variables. This error
may show if you have used "/&" in a text string in the label. Change
the string to use some other data, e.g. "/
character with the word "and".
Error 514 – Driver not set to Stored Mode
You have tried to generate a file for Stored Mode, but the driver is
set to Host Mode.
Change the driver to use Stored Mode in Printer-Settings-Layout.
Change the driver to use Stored Mode in Printer-Settings-Layout,
i.e. check the box "Store layout when printing".
Error 515 – Input file X:\Path\Filename.POF contains non-writeable
characters
SAPscript does not permit non-writeable characters.
You have probably used a graphic text or bar code object for a driver
that does not permit such data.
Check that you have not e.g....
• defined a graphical bar code – change to a printer bar code
• defined a graphical text for a DP driver.
Error 516 – POF file corrupt or empty
The POF file has been corrupted or damaged. Please check that a
correct file has been generated. Make a new try. If problem occurs
again, please contact your supplier.
Error 517 – Stored Mode not permitted for "Fingerprint" driver
You have tried to use Stored Mode for the Fingerprint driver.
If you want a Fingerprint output file, use the Host Mode when gen-
erating the file.
If you must use Stored Mode, use the Direct Protocol driver in-
stead. Set the driver to use Stored Mode in Printer-Settings-Layout,
i.e. check the box "Store layout when printing".
Error 518 – Driver not set to non standard protocol
You have tried to generate an ITF file from an IPL driver. The printer
driver is not correctly configured, as it will generate non-writeable
characters. Go to Printer-Settings-General. Activate the tick box
"Non standard protocol" and try again.
ERPLabel for SAP R/3
&" or substitute the "&"
SPACE
38