Defining Variable Data - Intermec EasyCoder 301 Installation And Operation Manual

Defining Variable
Data
ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1
When using variable text fields in the label, it is preferable to use
the variable field names as used in SAP.
Define the variables by going to the Object-Variable menu.
Add each of the variables by defining an Import field. In the Name
field, change the default name (e.g. Import0) to the field name (e.g.
Part_No).
Note:
Variable names cannot contain following characters:
&+-*/<>=^%,!"
Variable names cannot start with following characters:
0123456789
Maximum length of variable name is 34 characters.
If you want to use a name with a hyphen ("-"), e.g. SY-NAME, it
can be entered as SY_NAME, using an underscore character in-
stead. The ITF file for SAPscript will then be changed so that the
underscore character is replaced by a hyphen.
If you want to use the underscore character, this must be entered
as a double underscore "__", e.g. as SY__NAME. This will be
converted to a single underscore character.
Note:
Other variable types than Import are not possible to use, as
SAPscript does not support them.
ERPLabel for SAP R/3
10