Making Output File For Sapscript; Host Mode - Intermec EasyCoder 301 Installation And Operation Manual

Intermec easycoder 301: install guide

Hide thumbs Also See for EasyCoder 301:

Table of Contents

Making Output

File for SAPscript

Note:

The current label name file with

the POF extension is proposed

by default. The name must be a

short file name, i.e. 8 characters

plus a 3-character extension.

ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1

The SAP R/3 system requires a specific output format (ITF file) to

be used. This is generated by LabelShop by the command "File-

Generate an output file for the printer".

Make sure your label file is saved to disk.

Select the Template SAPHOST.POC. A dialogue will appear.

Save the file with your desired name on a location where the

SAPscript can reach it. By default the Print directory of LabelShop

is proposed, but it can be changed at will.

LabelShop will create a ITF file with the same name, but with the

extension ITF. The original file will be deleted. E.g. if you created

the output file sap_addr.pof, LabelShop will generate the file

sap_addr.itf.

ERPLabel for SAP R/3

Table of Contents