Stored Mode - Intermec EasyCoder 301 Installation And Operation Manual

Making Output
File for SAPscript,
cont'd.
Note:
The current label name file with
the POF extension is proposed
by default. The name must be a
short file name, i.e. 8 characters
plus a 3-character extension.
ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1

Stored Mode

Make sure your label file is saved to disk.
Select the Template SAPSTORE.POC from "File-Generate an out-
put file for the printer". The following dialogue will appear.
Save the file with your desired name on a location where the
SAPscript can reach it. By default the Print directory of LabelShop
is proposed, but it can be changed at will.
LabelShop will create a ITF file with the same name, but with the
extension ITF. The original file will be deleted. E.g. if you created
the output file sap_addr.pof, LabelShop will generate the file
sap_addr.itf.
When Direct Protocol is used
You will be prompted for a layout name. Enter the desired name.
Enter the same name as entered when the layout was stored when
printing. If a different name is given, SAPscript will not be able to
print out properly.
When IPL is used
The layout will refer to the number selected in the driver settings
(in the Forms tab).
ERPLabel for SAP R/3
17