6808CR 40- Column Printer Quick Start Guide
Print Roller Appears Dirty
Clean Your Printer.
Linerless Labels
Linerless label printing can cause the print head to become
sticky.
Print is Too Light
If you are not getting satisfactory darkness, connect your print-
er to the personal computer containing your Configuration Pro-
gram and click on the Paper Options button. Adjust the Dark-
ness setting to a higher percentage until the print is dark and
crisp. Refer to the Intermec Portable Printers Technical Refer-
ence Manual (p/n: 978-018-001) Section 4 for more details.
Charging Problems
Using an AC Adapter
If the printer does not respond when it is connected to an AC
adapter, there could be a problem with the adapter or with the
wall outlet.
" NOTE:
If the battery is depleted, it may take 5- -10 minutes
of charging before the printer can print a self test.
Using a Cigarette Lighter Adapter
If the printer does not respond when it is connected to a ciga-
rette lighter adapter, it is possible that the fuse may be blown.
To check, remove the cigarette lighter adapter from all power
supplies and unscrew the cover over the pin. Pull out the fuse.
If the elements in the fuse appear broken, replace the fuse.
Programming Problems
Refer to the Intermec Portable Printers Technical Reference
Manual (p/n: 978-018-001) Section 4 for more details OR call
the Intermec Technical Support 1-800-755-5505 for assistance.
14