Replace The Platen Roller - Intermec PR2 User Manual

Replace the Platen Roller

PR2 and PR3 Mobile Receipt Printer User Manual
3 Open the media door and remove the media.
Tear bar
Printhead
Black mark
sensor
4 Use the cleaning swab to clean all parts of the printer.
5 After the parts are dry, replace the media.
6 Turn on the printer.
If the platen roller becomes worn or damaged, you need to replace it.
1 Turn the printer off.
2 If necessary, disconnect the printer from power.
3 Lift both media release latches to open the media door.
Chapter 3 — Troubleshoot and Maintain the Printer
Platen roller
27