Intermec 6808 Quick Start Manual page 6

6808CR 40- Column Printer Quick Start Guide
Print-out Explanations
Self Test Description
Paper 1 or 2 ply
Beeper May be turned On or Off.
Batt Volt Current voltage of the battery pack.
Batt Temp Temperature of the battery.
Flash/RAM 1 Meg or 4 Meg Flash/ 1 Meg or 4 Meg RAM
Boot Ver- Boot sector firmware.
sion
Prnhd Temperature of print head (between 0 and
Tmp
50 degrees).
Infrared Set by the user to "Off", "IrDA", "ASK",
"ASK/CRC", "Direct", "Direct CRC",
"PULSE", or "PULSE--CRC"
Device
Shows type of device (i.e. 6808CR)
Name
Device
Shows user name for printer.
Nickname
IrDA* Ver
The 1.0 refers to the IrDA standard in use.
The next two digits refer to any IR modifica-
tions made to the configuration.
Available "LOC" shows whether a font is Resident (R)
Fonts or Downloaded (D). "CPI" shows characters
per inch. "DESCRIPTION" describes the
font. "NAMES" give the "Easy Print" name,
the Line Printer name, and the hexadecimal
equivalent of that name.
Table 1-1(continued)
6