Charging The Backup Battery; Turning On The Terminal For The First Time; Configuring The Terminal For Your Network - Intermec Trakker Antares 2460 Getting Started Manual

Charging the Backup Battery

The backup battery backs up all memory and the real-time clock in case of
a power failure. The backup battery ships inside the terminal, but it may
not be fully charged. You need to fully charge the backup battery after you
install the terminal.
To charge the backup battery
1. Make sure the power supply is connected to the terminal and a
powered electrical outlet.
2. Let the power supply charge the backup battery for 24 hours to fully
charge the backup battery.
Note: For more information about the backup battery, see the user's
manual.

Turning on the Terminal for the First Time

After you connect the power supply and install the terminal, you are ready
to turn on the 246X terminal.
To turn on the terminal
Press the button on the front of the terminal. The terminal runs
POST (power-on self-test), displays the version number, and then
displays the date and time.
18
On/Off button
246XG.020

Configuring the Terminal for Your Network

You need to configure the 246X terminal to communicate with serial or
Ethernet devices in your network. The parameters you configure depend
on the type of network or devices to which you want to connect the
terminal.
CrossBar Network
Host
9154/9161
2460 2460
9560
Printer
246XG.010
9560
Printer
19