9 Basic settings
In the basic settings, you can set different parameters that are rarely altered.
Unless you alter them, the indicated parameters are set to the following default
values:
Parameter
Pulse duration
Volume tone
Service code
LCD language
LCD brightness
LCD contrast
9.1 Changing the basic settings
To alter a parameter, proceed as follows:
(1) Switch off the instrument.
(2) Press the data selector <2> and hold it down.
(3) Switch on the instrument with the power switch <1> and wait (with the data
selector depressed) until the basic settings menu is displayed.
(4) Turn the data selector until the desired parameter line is selected.
(5) Press the data selector. The value to be changed in this line is selected.
(6) Set the desired parameter value by turning the data selector.
(7) Confirm the set value by pressing the data selector. The entire line is then
selected again.
PHYSIOTHERM-S
Default value Range
400 μs
200 - 600 μs (default: 400 μs)
50 %
0 – 100 %
0
any
DE (German), EN
FR (
French), IT (Italian), PT (Portuguese), RU
(Russian), TR (Turkish)
70 %
10 - 100 %
70 %
0 - 100 %
Basic settings
(
English), ES (Spanish),
45