Basic Settings - Physiomed PHYSIOSON-Expert Operating Instructions Manual

Basic Settings

8 Basic Settings
The basic settings serve to define different parameters that are rarely modified. You
can get to the basic settings by pressing the data selector <5> when switching on
the device with the mains switch.
The basic settings also contain parameters of the setup menu <10>.
You can select the following values in the basic settings:
20
Intensity control, acoustic signal every 0,1 W/cm
Dose limit after coupling of ultrasound waves:
ose cannot be increased after coupling
d
YES
dose increment is possible after coupling
NO
Unit of the ultrasonic dose displayed on the
dose indicator <7>: W or W/cm
Link coupling confirmation with timer
Timer runs only with sufficient coupling
YES
Timer runs independently of coupling
NO
Dose threshold, i.e. where instrument switches from continu-
ous to pulsed mode
Volume and pitch of the timer signal
Volume and pitch of the coupling confirmation
Screen contrast
Exit basic settings.
2
2
PHYSIOSON-Expert