Table of Contents
Advertisement
Voice over PLC Sample Application Operating Manual
3.
Operating procedure
When using the board for the first time, the node ID must be set according to 3.5.2 after startup.
3.1 Startup screen
After power on, CPX3 will be booted automatically and startup screen and main menu will be displayed.
*********************************************
* Voice over PLC Sample Application Program *
*
*********************************************
Start downloading CPX F/W... successful
---------------------------------------------
- FPAC Ver:0x0200 MAC Ver:0x022706E3
- Node ID :000
---------------------------------------------
3.2 Main menu
----- Main Menu ( READY
1: Call
2: Data Send
3: Setting
4: Volume
---------------------------------------------
>
1. Menu to call when starting voice communication.
2.
Menu to send binary data.
3.
Menu to edit the contents of EEPROM.
4.
Menu to change the input and output volume.
When the above menu number is selected, the sub menu shown in chapter 3.3 to chapter 3.5 is
displayed.
3.3 Call menu
---------------------------------------------
Direction (Simplex:0 Duplex:1)>
User specifies the
communication direction in 0.Simplex or 1.Duplex.
3.3.1 Simplex
---------------------------------------------
Dest Node ID (Ex. 0 1 3...)>
R11UM0083EJ0200 Rev.2.00
June 25, 2018
Ver2.00 [ 1 Sep. 2018] *
) ----------------
RENESAS CONFIDENTIAL
RENESAS Group CONFIDENTIAL
-
-
3. Operating procedure
Page 3 of 9
Advertisement
Table of Contents
