Table of Contents
Advertisement
NOTICE
It is recommended to conduct WI-Fi and 4G signal strength while
charger installation. The RSSI (Received Signal Strength Indication)
value is considered as good as higher than -65dBm. Poor connec -
tion quality might interrupt charging process or data transaction.
3.2 Grounding and Safety Requirement
•
The product must be connected to a grounded, metal, permanent wiring system.
Connections shall comply with all applicable electrical codes.
•
Ensure no power is connected at all times when installing, servicing, or maintain -
ing the charger.
•
Use appropriate protection when connecting to main power distribution network.
•
Use appropriate tools for each task.
CAUTION:
AC input shall be provided by installation contractor or technician in
accordance with the National Electric Code, ANSI/NFPA 70.
CAUTION:
used in addition to the cable assembly for connection of the EV to the
EVSE.
The disconnect switch for each ungrounded conductor of
A cord extension set or second cable assembly shall not be
9
semaconnect.com
Advertisement
Table of Contents
