Chapter 1 Safety Warning And Instructions; Normal Operating Environment; Safety Warning - xtemp UXP 8011-HC090 Operating Instructions Manual

``

Chapter 1 Safety Warning and Instructions

Chapter 1 Safety Warning and Instructions

1.1 Normal operating environment

The equipment is designed for safe operation under ambient conditions as follows:
 indoor use;
 altitude up to 2,000 m;
 temperature 5 °C to 40 °C;
 maximum relative humidity 80 % for temperatures up to 31 °C decreasing linearly to 50 %
relative humidity at 40 °C;
 mains supply voltage fluctuations up to ±10 % of the nominal voltage;
 transient overvoltage up to the levels of overvoltage category II;
 temporary overvoltages occurring on the mains supply;
 Pollution degree 2 or less of the intended environment;
 Wet location
Excessive high or low temperature and/or humidity will significantly degrade electric safety of
the equipment!
Note the effect of the altitude on the boiling point of the heat transfer liquids!

1.2 Safety warning

When heating and conditioning with specimen or application system which is intrinsically
explosive, flammable or toxic or, which liberates hazardous substances as result of reacting,
dissolving or mixing under operating temperature range for normal use, safety acts and
regulations for the particular chemicals and experimental laboratory shall be observed!
Not applicable for specimen or application system which develops tremendous energy as
result of reacting, dissolving or mixing under operating temperature range for normal use!
The dielectric strength of the equipment may be degraded if after transport or storage in
humid conditions. The equipment shall be powered as for normal use and conditioned at its
maximum operating temperature or 105°C, whichever is smaller, for at least 1h before
commissioned for normal use. Warning, hazard of electric shock during the dry-out!
XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
/
31 DSGO0708-2-V211119/UXP8011-CD6400/CLASS I/NFL/RT+5~+100°C
5
1