Table of Contents
Advertisement
Preface
Preface
In order to make the equipment fully functional and ensure safety of the operator, the
equipment, property and specimen, read this manual carefully and completely. When you
have any question that cannot be explained by this manual, consult your local distributors or
supporting technicians. It is our pleasure to provide service for you.
General safety notes
The equipment is designed for operation with non-flammable heat transfer liquids only!
No silicone oil is allowed for use with this series of the equipment. The internal silicone rubber parts
may swell when in contact with silicone oil resulting in leakage of the liquid! For engineering
change related to the use of silicone oil or other liquid, consult Xtemp engineer!
The equipment is intended for heating, conditioning of specimen and/or application system by
immersion in or external circulating of the liquids. This leads to potential hazards of high or low
temperatures, fire, and the general hazards related to the application of electrical energy.
The operator is largely protected through the application of the appropriate standard
specifications.
Further hazard sources may arise from the type of material being treated, e.g. mixing, dissolving,
reacting and resultant excessive energy, liquid spillage resulting from immersion or removal
of the specimen, and by the fracture or rollover of the container and reaction with the heat
transfer liquid.
It is not possible to cover all possibilities; they remain largely within the responsibility and the
judgment of the operator!
The equipment must only be used as intended and described in these Operating Instructions. This
includes operation by suitably trained qualified personnel.
The maximum temperature deviation both in normal condition and in electro-magnetic
interference field according to IEC 61326-1 is ±0.2 °C.
Classes of the EMC standard IEC 61326-1
Class A: Equipment for operation only on networks without connected domestic areas;
Class B: Equipment for operation on networks with connected domestic areas.
Caution, Class A equipment must not be operated on power networks with connected
domestic areas!
Important symbols
For your safety, pay attention to these important symbols as follows, during moving, installing
operating and maintenance. The equipment is designed for safe operation because of your
attention!
XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
/
31
DSGO0708-2-V211119/UXP8011-CD6400/CLASS I/NFL/RT+5~+100°C
3
P
Advertisement
Table of Contents
