Warranty; Service Life; Technical Data - Otto Bock Start M1 Instructions For Use Manual

Technical data

10.2 Warranty

Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).

10.3 Service life

Expected service life: 4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected ser­
vice life. These also include the requirements for maintenance, ensuring effectiveness and the safety of the
product.
11 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
General information
Max. load (in kg)
Weight [kg]
(for seat width of 430 mm)
Transport weights [kg]
(for seat width of 430 mm)
Seat width [mm]
Seat depth [mm]
Lower leg length [mm] (without cushion)
Max. overall height [mm]
(for rear seat height: 470 mm; back support height 420 mm;
push handle)
Turning circle approx. [mm]
(for seat width of 430 mm and seat depth of 420 mm)
Maximum permissible inclination [°]/[%]
1)
The specified weights vary according to the selected options and model.
2)
In accordance with ISO 7176-5, 8.12
3)
Factory setting: 420
Additional information
Start M1
Total weight
Mass of the heaviest component [kg]
Overall length with foot supports [mm]
Overall width [mm]
Length (folded) [mm]
Width (folded) [mm]
Height (folded) [mm]
Seat bottom angle [°]
Effective seat depth [mm]
Effective seat width [mm]
Front seat height [mm]
Rear seat height [mm]
Back support angle [°]
Back support height [mm]
Distance from leg support to seat [mm]
Distance from arm support to seat [mm]
Drive wheel size ["]
24
Start M1
125
1)
from approx. 14.7
Frame: from approx. 9.7 1)
Leg support: approx. 1.4 1)
Drive wheels 24" (pair): approx. 3.6
380/405/430/455/480/505
400/420 2)
3)
380–500
945
1,400 2)
7/12.3
Minimum
14.4
9.6
943
570
943
310
925
2
400
380
450
450
2
400
280
200
24 1)
1)
2)
Maximum
15
10
1,015
695
1,015
---
975
---
420
505
510
500
---
420
500
220
24 1)
Start M1