Options And Accessories; Cutter Blocks And Planing Knives; Accessories For Tersa Cutter Blocks (Standard); Accessories For Traditional Cutter Blocks (Option) - HOKUBEMA PANHANS 436/100 Operating Manual

16 Options and Accessories

16.1 Cutter Blocks and Planing Knives

16.1.1 Accessories for Tersa Cutter Blocks (Standard)

Article Description
TERSA Disposable
Standard quality 630 mm for the TERSA Cutter Block.
Reversible Knife
TERSA Disposable
HSS steel quality 630 mm for the TERSA Cutter Block.
Reversible Knife HSS
Brass Wedge For loosening the pressure bar segments when changing knives.

16.1.2 Accessories for Traditional Cutter Blocks (Option)

Article Description
With strong magnetic adhesion, the planing knife protrusion is accurate
Magnetic Quick
to 1/10 mm due to the fine adjustment. Suitable for all cutter block di-
Adjusters Type 1533
ameters from 80 - 145 mm.
Strip Planer Knife PANHANS-Granat 630 x 35 x 3 mm, Standard quality for PANHANS Tradi-
1505 Standard tional Cutter Block shaft, made of continuous cut steel
Strip Planer Knife PANHANS-Granat 630 x 35 x 3 mm, Standard quality for PANHANS Tradi-
1505 HSS tional Cutter Block shaft, made of HSS steel
Cutter Block
Balanced, with screws R 1/4", SW 17 (supplied in pairs).
Pressure Bars
Cutter Block
Standard version, height approx. 21 mm (hardened, R 1/4", SW 17).
Spare Screws
Flat Spanner SW17 For cutter head screws with spanner size 17 mm.
Cutter Block For lifting the knives and for easier adjustment of the knives with mag-
netic quick adjusters (see  Art.-No.: 2004 above).
Pressure Spring

16.1.3 Accessories for Spiral Cutter Block (Option)

Article Description
With 6 rows of spiral knives, 27 rotatable and replaceable car-
Solid Steel bide inserts with 4 cutting edges per row for improved cutting
Cutter Block quality through "pulling cut", longer service life and enormous
noise reduction.
Replacement
162 pieces replacement carbide inserts, turnable and exchange-
Carbide Inserts for
able, 15 x 15 x 2.5 mm, 30°, with 4 cutting edges
Spiral Cutters
Replacement 162 pieces replacement carbide inserts, turnable and exchange-
Carbide Inserts for able, 15 x 15 x 2.5 mm, 30°, with 4 cutting edges for the com-
Spiral Cutters plete cutter block.
Case with 1 litre resin dissolving concentrate, 1 cleaning brush
Service set for each of steel and brass, 10 reversible carbide inserts (15 x 15 x
Spiral Cutter Blocks 2.5 mm), incl. 5 screws (Torx M6 x 15 mm), 1 torque spanner
and 2 bit inserts for assembly.
Spare Screws for
10 pcs. spare screws (Torx M6 x 15 mm)
Spiral Cutter Block
BA_PH_436-100_EN_44-21.docx
Art.-No.
4096
4126
7003.0050
Art.-No.
2004
3308
3316
4131
4107
4113
4114
Art.-No.
4472
4641
4641.6
4647
4642
47