Table of Contents
Advertisement
10.7 Warnings and Error Messages
10.7.1 Warnings
Warnings are signalled by a "Warning" pop-up window with a yellow background. The yellow highlighted warn-
ings appear as soon as the "Start" button is pressed during a pending problem:
Figure 27: Warning 1
Figure 28: Warning 2
Figure 29: Warning 3
Figure 30: Warning 4
Error messages can be found on the following pages in section 10.7.2
BA_PH_436-100_EN_44-21.docx
The protective cover is open. It is not possible to work with
Cause:
an open protective cover!
Remedy:
Close the protective cover.
The feed switch is in position "I" (ON). The feed can only be
Cause:
switched on when the cutter head has reached full speed
and the start/stop button stops flashing.
Remedy:
Switch off the feed switch.
Cause:
The machine brakes.
Remedy:
Please wait until the machine has stopped completely.
Cause:
The "Brake Release" selector switch is active.
Remedy:
Turn the selector switch to "inactive" position.
33
Advertisement
Table of Contents
Troubleshooting
