Installation And Connection; Check Delivery Conditions; Transport To The Installation Site; Installing The Machine - HOKUBEMA PANHANS 436/100 Operating Manual

Thickness planer
Table of Contents

Advertisement

7 Installation and Connection

7.1

Check Delivery Conditions

Check the consignment for completeness and possible transport damage. In case of transport damage, please
keep the packaging and inform the shipping company and the manufacturer immediately! Later complaints can-
not be accepted.
7.2

Transport to the Installation Site

The machine is delivered on a transport pallet and is bolted to the bot-
tom of the pallet. The centre of gravity of the machine is approximately
in the middle of the transport pallet.
• Unscrew the screw fastening of the machine on the transport
pallet.
• Drive a forklift truck under the machine from the front and lift it
a few centimetres.
• Lift the machine off the pallet using the forklift truck.
• Drive between the machine from the front with a lift truck, lift it
only a few centimetres and move it to the final installation site.
Pay attention to the existing danger of tipping over
during transport!
7.3

Installing the Machine

• A foundation is not required. The floor must have a load-bearing capacity corresponding to the machine
weight (1050 kg).
• Level out any unevenness of the floor with underlays and a spirit level.
• The bare parts of the machine are greased to protect them from corrosion. Carefully degrease the parts
protected against rust with petroleum or benzine.
Be aware of possible crushing hazards when placing the machine (from the pallet to the
floor) by means of a forklift truck or overhead crane. Pay particular attention to your
hands and feet and wear safety shoes and protective gloves as a precaution.
Danger to life when using a forklift truck! Keep a sufficient distance from the forklift truck
and watch its speed. Vehicles with combustion engines also produce toxic exhaust gases.
Wear a breathing mask if necessary.
It is essential that the machine is level! Check with spirit level!
Dispose of the packaging material in an environmentally friendly way!
Do not use nitro thinner for cleaning. Painted surfaces of the machine can be damaged.
Fire hazard! Do not smoke and do not light an open fire.
BA_PH_436-100_EN_44-21.docx

Figure 7: Transportation

22

Advertisement

Table of Contents
loading

Table of Contents