Memory Clearing - Icom IC-R1500 Instruction Manual

5
MEMORY OPERATION

■ Memory clearing

Contents of programmed memories can be cleared (blanked),
if desired.
qPush [V/MHz•SCAN] to select VFO mode.
wPush [S.MW•MW] to enter select memory write mode.
• "!" and the memory channel number blink.
eRotate [DIAL] to select the memory channel to be cleared.
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO.
Push three times, then push
21
rPush [TS•MODE] three times to select "CLEAR," then
push and hold [S.MW•MW] for 1 sec.
• 3 beeps sound.
• The cleared channel changes to blank channel
• "!" and the memory channel number blink continuously.
tPush [V/MHz•SCAN] to return to VFO mode.
☞NOTE: Be careful!— the contents of cleared memories
Push .
for 1 sec.
"
"
Beep
"
Beep
" Beep
"
CANNOT be recalled.
Rotate for selecting memory channel.
Push to return to VFO.