Intercom Operation; Channel Names - Icom IC-M502 Instruction Manual

13
HM-127 REMOTE-CONTROL MICROPHONE

Intercom operation

q Push [LO/DX•IC] for 1 sec. to ac-
tivate the intercom function.
• "IC" appears in the priority channel
readout.
• The channel name disappears.
w Push [PTT] to talk.
• " " appears in the channel
name indicator.
e Release [PTT] to listen.
• " " appears in the channel name indicator when the trans-
ceiver is in talking.
r Push [LO/DX•IC] to cancel the intercom function.
• Pushing [16], [SCN•TAG] or [CH/WX] is also cancels the inter-
com function.
For your reference:
In case the intercom mode is selected with the transceiver
during microphone power OFF, the microphone power is au-
tomatically turned ON and the intercom mode is selected.
Intercom beep function
Push [LO/DX•IC] for more than 1 sec.
• Emits intercom beep while holding.
56
Appears when the inter-
com function is in use.

Channel names

q Push [Y]/[Z] to select a channel to program.
• Push [CH/WX•U/I/C] several times while pushing [H/L] to select
the channel group (USA, INT, CAN), if desired.
w While pushing [H/L], push [16•9].
• The 1st character of the currently programmed comment flashes.
e Push [Y]/[Z] to select a character.
r Push [SQL] to move to right; then push [Y]/[Z] to select a
character.
• Push [VOL] to move to the left.
t Continue until the desired characters have been selected,
the push [16•9] to return to normal operation.
• Available characters
(space) (!) (") (#) ($)
( ) (+) (,) (–) (.)
(4) (5) (6) (7) (8)
(E) (F) (G) (H) (I)
(O) (P) (Q) (R) (S)
(Y) (Z) (a) (b) (c)
(i) (j) (k) (l) (m)
(s) (t) (u) (v) (w)
(%) (&) (') (( ) ( ))
(/) (0) (1) (2) (3)
(9) (A) (B) (C) (D)
(J) (K) (L) (M) (N)
(T) (U) (V) (W) (X)
(d) (e) (f) (g) (h)
(q) (r)
(n) (o) (p)
(x) (y) (z)