LEAB RBC 1280 User Manual page 20

11 Operation
Operating status
Tab. 1: Display of the operating status LEDs
Charging the Battery
The charger begins to charge the battery as soon as the charger is connected
to the 230 V mains.
Interrupting the Charging Process
To interrupt the charging process, proceed as follows:
1. To interrupt charging, press the Stop button.
ð 'Charging complete' LED flashes green.
2. To continue charging, press the Stop button again.
ð The charging process is now interrupted
NOTE! If the Stop button is not pressed again, charging remains interrupted.
20 LEAB Automotive GmbH
LEAB Automotive GmbH
Description
Battery not connected/No CAN signal
Charging is interrupted
Charger in first charging phase
Charger in second charging phase
Charger in third charging phase
Battery fully charged
Charger waiting for remote
Thorshammer 6 24866 Busdorf