Arm Adjustment; Glass Adjustment - Hussmann Q3-M/FV-EP User Manual

Installation (cont'd)
Q3-MV Arm/Glass Adjustment
Before any adjustments are made ensure
that the case is completely level from front to
back and left to right. A level case will ensure
optimal alignments as well to like cases.
Begin the Arm Adjustment process by removing
the rear doors from the frame. This can be done
by lifting up and outward away from the rear door
frame.
2
1
Once the door has been removed, unfasten the
rear piping cover by removing the following 2
screws.
Remove
screws
The LED light can now be removed to access
the Turn Buckle.
LED Light
can be rolled
o hinges
½
Using a " open-ended wrench, turn the turn
buckle connecting rod until the level placed
above the canopy arms reaches its levelled
point.
• Note that some turn buckles may be reversed
thread. Test the turning direction by observing
the effect of turn direction.
• Upon reaching Level turn the connection rods
two full rotationin the direction which raises
the canopy. This will PRELOAD the arms to
compensate for the weighted product.
13
Turning point
Connecting Rod