Periodic Recording - Saadat DENA 650 User Manual

Chapter 5: Recording Operation

Periodic Recording

To perform periodic recording:
1- Enter the "Recorder setting menu", and select the desired time interval (5-60 min) for "Periodic
Recording".
2- Select number of recording repetitions. Available options are "infinite" and 1-20.
3- The recording type in this case is similar to other types of recording and is determined using the Print
Mode menu.
NOTE

In this case, the recording is always done according to the latest settings of the device.

You can also perform Automatic, Manual and Rhythm recordings during Periodic recording. For
this purpose:
1- select the recording mode and desired settings.
2- Press the Start/Stop key.
After the recording in the selected mode is finished, Periodic recording will be continued
automatically.

If the device is set on Manual modes and the Periodic mode is active, the device records the
equivalent Automatic mode. For example, the device considers the Manual 3+1 as Auto 3+1.

It is possible to copy the stored information only in Auto and Rhythm modes (since recording
in periodic mode is also done in automatic mode, it is also possible to copy in this mode).

In all recording types and at any stage of recording, it ends by pressing the Start/Stop key.
40