Chapter 7: Data management
General information
All ECG recorded data in Auto and Rhythm modes, as weel as Periodic recordings, will be stored in
the internal memory of DENA 650 for future reference. For this purpose, the Save option in User
settings menu should be Enable. In case of disabling the Save option no data is saved in the Archive.
Up to 100 records can be stored in the internal memory. When the memory is full the new data will
overwrite the oldest data.
Transferring the saved data is possible through the Export menu using a flash memory.
NOTE
Signal storage is always done as Sync.
Archive Menu
Select Archive from the Main Menu to access the below menu.
Entering the Archive menu displays the properties of all stored signals.
The following information about each saved record can be seen in the Archive window:
Assigned code by the system
Patient's name (if any)
Patient's ID (if any)
Date/Time of recording
Recording mode: "R" indicates Rhythm mode and "P" indicates Periodic mode. "PR" indicates
both Rhythm and Periodic modes.
The last record is always displayed at the top of the list.
Figure 7-1 Archive menu
48