1
Genius II Quick Start Guide
1.1
Contents of Genius II Kits
Your Genius II kit contains the following components:
• Genius II Control Unit, containing Ebeam, Turret, and Sweep Control Modules
• Hand-held controller with 10-ft. connection cable
• Mounting hardware for installation in a standard 19-inch rack
• Magnet-connection cable (PN 1-9500003)
• Input power cable (PN 1-9500024)
• Grounding cable (PN 1-9500001)
1.2
Basic Hardware Installation
Figure 1 Genius II Front Panel, Showing Connections Port for Hand Held Remote Controller
0101-9031-0, Rev. B
Step
Action
1
Using the mounting hardware supplied, install the Genius II controller
in a standard 19-inch rack.
2
Plug the connector on the end of the remote controller's cable into the
port indicated in Figure 1.
Connection Port for Hand
Held Remote controller
1
On/Off Button
Genius II User Manual