ferrotec Genius II Quick Start Manual page 4

Liability
The manufacturer's liability for the Genius II is based on the principles of German law. The manufacturer
accepts no liability for damage and losses due to:
• improper use
• operation by unauthorised personnel
• failure to follow safety regulations
• failure to comply with the instructions in this manual.
Translation
If the machine is sold to a country in the EEA, this manual must be translated into the language of the
country in which the machine is to be used. Should the translated text be unclear, the original manual (in
English) must be consulted or the manufacturer contacted for clarification.
Intended Use
This manual is intended for all who may use or work on the Genius II controller, especially the operating
personnel. The mounting instruction contains an exact description of the product, but does not warrant
certain properties or success of use. The instruction handbook was inspected carefully before publication.
The authors guarantee that the mounting instruction does not contain errors that cancel or reduce the value
or suitability of the device for its intended use. The publishers, however, accept neither explicitly nor
implicitly any liability for damage or consequential losses resulting from use of this manual. We are thankful
for notification of errors and for recommendations and criticism. Where not stated otherwise, the technical
state at the time of joint delivery of product and manual is definitive. We reserve the right to make technical
changes without prior notice. All previous revisions of this manual then lose their validity.
The Genius II controller is part of a group of devices for the operation of an electron beam evaporator
installed in a vacuum chamber. This group of devices consists of:
1. a high voltage power supply (HVPS)
2. the Genius II controller, including hand-held remote control
3. a filament power supply (FPS)
4. a grounding rod
Use of the Genius II controller other that in combination with this group of devices is not allowed. The
Genius II is intended solely for the control of this group of devices. Use of the Genius II for any other
purpose requires the approval of the manufacturer. This Manual deals only with the design and operation of
the Genius II. Please see the relevant user manuals regarding operation of the other devices in the group.
These devices were developed, designed, and build solely for commercial/industrial use. Proper use in
accordance with its designated use includes compliance with the manufacturer's operating, maintenance,
and repair instruction.
Access to the electron beam evaporator is to be secured by the unit controller in such a way that it is
possible to ensure that both the rotary crucible movement and the high-voltage power supply are stopped.
To this end, external connection options are available at the high-voltage supply and at the Genius II
controller. The person setting up the entire unit is required to integrate this safety function in accordance
with the performance level determined in the functional safety.
01010-9031-0, Rev. B
W A R N I N G !
ii Genius II Quick Start Guide