Figure 22 Config>Sweep Screen, Configuration Completed, Auxiliary Menu Displayed; Figure 23 User Exiting Configuration Mode, Mode Select Popup Displayed - ferrotec Genius II Quick Start Manual

1.5 Configuring the Control Modules
Figure 22 Config>Sweep Screen, Configuration Completed, Auxiliary Menu Displayed

Figure 23 User Exiting Configuration Mode, Mode Select Popup Displayed

The unit is now ready for normal system operation.
Genius II Quick Start Guide
Touch the Auxiliary Menu's Change Mode button to display the
2
mode-select popup, which is shown in Figure 23.
3
3 To exit from Configuration Mode and save your changes, touch any
active button on this popup. The Genius II will then enter the selected
mode.
1.5.5 Exiting Configuration Mode and Saving Configuration Changes
20 0101-9031-0, Rev. B