Figure 6 Connections To Rear Panel Connector X119, Configuration #1; Figure 7 Connections To Rear Panel Connector X119, Configuration #2 - ferrotec Genius II Quick Start Manual

1.3 Making Cable Connections

Figure 6 Connections to Rear Panel Connector X119, Configuration #1

Figure 7 Connections to Rear Panel Connector X119, Configuration #2

Genius II Quick Start Guide
2 Make the required connections between the higher-level controller and
rear panel connector X119. This wiring can follow either of two
configurations, as shown in Figures 6 and 7. Table 2 provides
functional descriptions of the I/Os exchanged via connector X119.
8
1.3.3 Making Connections to a PLC-Based System Controller
0101-9031-0, Rev. B