The display of the maximum displacements /
5.2.1.3
Measuring values in accordance with the governing code
Press
again to view the system information and the measuring values that are automatically
registered in accordance with the governing code for Effects on persons in buildings:
•
the v
eff,max
•
the KB-values in accordance with DIN 4150 or the v
with SBR (VIBRA
A data save level of 0.1 has been set for both the values, as specified in the respective governing
codes. Measuring values below this threshold are not saved and displayed as 0 in the PC software.
This measurement is done fully parallel with the measurement Effects on Structures.
Measuring values according to the SBR 2002 (VIBRA-sbr and VIBRA + ):
Measuring values according to the DIN 4150 (only shown by the VIBRA + ):
is only available in the VIBRA + :
u /
–values in accordance with SBR 2002 are shown (VIBRA-sbr only).
+
only).
Manual Profound VIBRA-series, version 2.00
-values in accordance
eff,max
25