Table of Contents
Advertisement
HP 16530/31 A- General Information
Trigger Modes
Immediate:
Edge:
Pattern:
Auto-Trigger:
Events Delay:
Table 1-2. HP 16530/31A Operating Characteristics (cont.)
Allows oscilloscope to be triggered by port-in, or another HP
16500-series measurement module.
Triggers on rising or falling edge of any internal channel or external
trigger, count adjustable from 1 to 32,000.
Triggers on entering or exiting a specified pattern of all internal chan-
nels and external trigger, count adjustable from 1 to 32;000.
If enabled, the timebase will self-trigger if the trigger rate is below 40
Hz.
The trigger can be set to occur on the nth edge or pattern, as specified
by the user. The number of events (n) can be set from 1 to 32,000
events.
Outputs/Rear-panel BNC:
HP 16530A output BNC provides a probe compensation source - 1
kHz square wave, switching between - 0.4 V and - 0.8 V, with 50
Q
output resistance.
DIGITIZER
Resolution: 6 bits (1 part in 64)
Digitizing Rate: Up to 400 megasamples;second
Digitizing Technique:
Real-time digitizing; each 4k record is acquired on a single acquisition
Acquisition Memory Size: 4096 samples per channel
1-6
Advertisement
Table of Contents
