Table of Contents
Advertisement
TO PREVENT SERIOUS INJURY OF DEATH NEVER OPERATE THIS UNIT
UNLESS EMERGENCY STOP FUNCTIONS PROPERLY
1.
In case of an emergency, pushing either the stop panel rearward (A), or pulling the
trip cables (B) will stop cross conveyor, beaters, and main apron.
2.
Activating emergency stop only stops box functions. The PTO shaft will continue to
rotate.
3.
Keep excessive slack out of trip cables.
4.
Trip emergency stop occasionally, and when starting the unit after periods of storage to
insure proper function.
5.
To reset, move lever (C) clock wise to engage position.
A
C
SAFETY INFORMATION
W A R N I N G
EMERGENCY STOP
B
-10-
Advertisement
Table of Contents
