Table of Contents
Advertisement
ADJUSTMENTS
MAIN APRON
Main feeder apron adjustment bolts are located behind the convenient access door located in the
bottom portion of rear tailgate . Remove handle nuts (A) to open access door and swing door
downward .
All apron chains must be taken up evenly before you use the forage box . Check again after the first
few loads . The Main Feeder Aprons should be at proper tension at all times . Tighten the full threaded
bolts (B) to adjust aprons . Aprons are properly adjusted when two Cross Slats, or about three feet of
chain lift off the Chain Return Slides from the rear of the box . Maintain this tension when operating the
box .
A
B
-17-
Advertisement
Table of Contents
