Table of Contents
Advertisement
TO PREVENT SERIOUS INJURY OF DEATH NEVER OPERATE THIS UNIT
UNLESS EMERGENCY STOP FUNCTIONS PROPERLY
1.
In case of an emergency, pushing
either the stop panel rearward (A),
or pulling the trip cables (B) will
stop cross conveyor, beaters, and
main apron.
2.
Activating emergency stop only
stops box functions. The PTO
shaft will continue to rotate.
3.
Keep excessive slack out of trip
cables.
4.
Trip emergency stop occasionally,
and when starting the unit after
periods of storage to insure proper
function.
5.
To reset, move lever (C) clock wise
to engage position.
SAFETY INFORMATION
W A R N I N G
EMERGENCY STOP
A
C
-10-
B
Advertisement
Table of Contents
