Adjustments - H&S HDII RAKE Operator's Manual And Parts List

ADJUSTMENTS

HITCH
There are ten different positions to adjust the hitch
on the HDII Rake. Hitch should be adjusted so
rake beams are level or parallel to the ground.
RAKE BEAM
Rake beams should be adjusted so they are
level to slightly up in the front. They can be
adjusted by using the rachet jack located
near the center of the rake. This adjustment
is important to keep rake wheel ground pressure
even along the rake beam. Failure to do this
will cause the front wheels to make heavier
contact with the ground.
RATCHET JACK
-13-