H&S HDII RAKE Operator's Manual And Parts List page 49

Table of Contents

Your new H&S HDII Rake has been manufactured of the finest quality materials

and components. The performance you get from your machine is largely dependent upon

how well you read and understand this manual and apply this knowledge. There is a right

and a wrong way to do everything. Please do not assume that you know how to operate

and maintain your HDII Rake before reading this manual carefully. Keep this manual

available for ready reference.

Number of Wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Wheel Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60"

Teeth per Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 (18 sets of 2)

Teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rubber Mounted In A Set Of 2

Transport Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12' 3"

Transport Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28' 3"

Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5800 lbs.

Maximum Raking Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30' 3"

Maximum Finished Windrow Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72"

Rake Wheel Hubs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tapered Bearings

Rake Beam Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to 10°

Hitch Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Standard

Tail & Work Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Standard

Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.5L x 15SL

Warranty:

See Warranty on Page #1

NOTE:

Determine right or left side of HDII Rake by viewing it from the rear. If instructions or parts lists

call for hardened bolts see page 9 to identify.

H&S MANUF A A A A A CTURING CO

H&S MANUF

2608 S. Hume Ave.

P.O. Box 768 - Telephone (715) 387-3414

FAX (715) 384-5463

MARSHFIELD, WI 54449

H&S HDII RAKE SPECIFICATIONS

CTURING CO . . . . . INC

CTURING CO

H&S WAREHOUSE Rt #5 and 76

P.O. Box 1260 - Telephone (716) 736-7595

INC . . . . .

INC

FAX (716) 736-7596

RIPLEY, NY 14775

Table of Contents