Table of Contents
Advertisement
Industrial Electronic Devices
Each SNMP variable created will have its own OID and it will be created following this rule:
OID 1 (first row of "Set SNMP Access -> SNMP Read" table): .1.3.6.1.4.1.49314.1.1.1.4.9.1
OID 2 (second row of "Set SNMP Access -> SNMP Read" table): .1.3.6.1.4.1.49314.1.1.1.4.9.2
OID X (Xth row of "Set SNMP Access -> SNMP Read" table): .1.3.6.1.4.1.49314.1.1.1.4.9.X
The memory blocks are accessible with these OIDs:
Block1: .1.3.6.1.4.1.49314.1.1.1.4.1.0
Block2: .1.3.6.1.4.1.49314.1.1.1.4.2.0
Block3: .1.3.6.1.4.1.49314.1.1.1.4.3.0
Block4: .1.3.6.1.4.1.49314.1.1.1.4.4.0
Block5: .1.3.6.1.4.1.49314.1.1.1.4.5.0
Block6: .1.3.6.1.4.1.49314.1.1.1.4.6.0
Block7: .1.3.6.1.4.1.49314.1.1.1.4.7.0
Block8: .1.3.6.1.4.1.49314.1.1.1.4.8.0
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual SNMP Agent / CANopen
Document code: MN67156_ENG
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Revision 1.100
Pagina 31 di 40
Advertisement
Table of Contents
Need help?
Do you have a question about the SNMP Agent / CANopen and is the answer not in the manual?
Questions and answers