Table of Contents
Advertisement
User Manual SNMP Agent / CANopen
Document code: MN67156_ENG
Revision 1.100
Pagina 32 di 40
Industrial Electronic Devices
Writing CAN data from SNMP:
In order to write the data from the HD67156-A1/B2, it is necessary to use the SET command.
Each OID defined in the section "Set SNMP Access -> SNMP Write" will be placed in the MIB tree of the converter.
In addition, it will be possible to write the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the SNMP Agent / CANopen and is the answer not in the manual?
Questions and answers